Listed at $74,900

Interested in this yacht? Contact Us

Available for Sale22 Cruiser22' 2002 EagleCraft 

2002 EagleCraft Aluminum Fish Boat

Built by EagleCraft and Daigle Welding for a Washington State ferry captain as his “down time” boat. This is a brilliant vessel, designed specifically to take on the Northwest waters and more importantly, designed to catch fish! Meticulously maintained, this boat offers unparalleled design and features rarely found on a boat of this size. Features include walk-thru transom with swim platform, full suite of electronics, and windlass with remote. This one-of-a-kind northwest fishing machine is a must see…Custom Road Runner trailer included!

26 North Yachts is pleased to assist you in the purchase of this vessel. This boat is centrally listed by United Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

Specifications

LOA: 22' (7 m)
Beam: 7' (3 m)
Hull Material: Aluminum
Fuel Capacity: 96 gal (364 L)
Fresh Water Capacity: 30 gal (114 L)
Holding Tank: 10 gal (38 L)
Flag: United States
Location: Bainbridge Island, United States, Washington
Build Year: 2002
Builder: EagleCraft
Model: 22 Cruiser
Type: Aluminum Fish Boats
Cruising Speed: 28 Knots
Max Speed: 33 Knots

Details

Vessel Walkthrough and Features

Golden Eagle Hull - 22' Length x 8'6" Beam; 34" Sides; 3/16" Side Plating and 1/4" Bottom Plating. Hull Serial # ZVG00597F202.

  • Cuddy Cabin - High Profile Cuddy Cabin includes vee-berth with upholstery, side shelves, storage, hull and deck insulation with headliner, insulation. Door and Hatch.
  • Watertight engine room bulkhead
  • Soundproof watertight bulkhead
  • Soundproof Hull with acoustic tiles below waterline under cuddy and main cabin
  • Bomar Hatch - 20" X 20"
  • Windshield - Diamond Seaglaze Glass
  • Soft top comes with removable side curtains, drop curtain, stainless steel frames
  • Soundproof engine compartment lid
  • Self-bailing 5086 plate deck
  • Scupper plugs
  • Side shelves (full length) one on each side
  • Swim Grid - partial
  • Walk-Thru transom gate to swim grid
  • Windline stainless steel swim ladder to stow under swim grid
  • Bow rail - low profile
  • Anchor Chain Compartment in bow with inspection port from Cuddy for Windlass application
  • Doubler plate on bow
  • Radar Arch - Custom
  • Hand railings forward of the Radar Arch to facilitate safe access to foredeck
  • Rod holders on arch (4)
  • Prawn and crab hauling davit with plastic bushings
  • DC-powered Hauler with power plug and switch in gunwale
  • Fish Box/Live Well combination - Built in (14" x 12" x 40") with lift-out plastic liner recessed in aft gunwale, with live well timer and Speedo pick up tube
  • Custom fish cleaning table at rear station
  • Fresh water washdown system - faucet, 10' hose. Raw water washdown system - high pressure with demand pump.
  • Fuel tank - aluminum 96 gallons built-in
  • Racor 320R-01 gasoline fuel filter is primary. A secondary filter is on the engine.
  • Fuel Gauge and Sending Unit
  • Mechanical over Power Steering - Single Station with stainless wheel
  • Bennett hydraulic 9" X 18" trim tabs
  • (2) 1,000-gallon per hour bilge pumps, automatic, with super float switches and 3-way panel switches
  • Fresh water tank - plastic - port side
  • Manual Marine Toilet - 10 gallon holding tank; Y-valve; electric bellows pump
  • Installation of stainless-steel valves and thru-hull intake fittings
  • (3) WaveRider Seats – fold-up arms, powder-coated frames installed on shock absorbing seat pedestals
  • (1) Seat/Storage box - with upholstery and with backrest (36" x 16" x 14")
  • Footrest - Pipe type for Helm and Co-Pilot seats
  • Navigation Lights
  • Dome light for Cuddy
  • Rear spreader light mounted on Arch
  • Windshield Wiper X 2 - Ongaro, Bus Heater/Defroster heated by engine coolant with 3-speed fan switch
  • Maxwell Freedom 500RC anchor windlass for rope/chain combination
  • Windlass with remote switch for up and down operation at helm position - including solenoid and heavy-duty breaker. Uses 4" High Tensile Chain and White Nylon Braid Rope. 20' of chain and 200’ of rope.
  • Bruce type Stingray Anchor
  • Heavy Duty Stainless Self Stowing and Releasing Bow Roller for Anchor Windlass
  • Compass Ritchie B-80 with light installed at helm
  • Horn-Stainless Steel trumpet electric/air horn
  • 12-volt Power socket at helm
  • Bilge Blower for engine compartment
  • Swivel EZE Ski post (removable)
  • (4) Scotty Striker Rod Holders
  • (2) Scotty 12-volt Electric Downriggers with 30" boom
  • Non-skid surface applied to all working surfaces
  • Rub rail completely fendered with 2" Grey 'D' Rubber on gunwales and swim grid

Electronics and Helm

Raymarine suite:

  • GPS
  • Chartplotter
  • Radar
  • Depth sounder/fishfinder
  • Two (2) 7” Color Displays

Electrical

  • Lifeline Gel Batteries (2)
  • MinKota Smart Charger
  • Blue Sea Systems DC Meter
  • Shore Power, 20 AMP
  • AC Outlets (3)

Engine and Mechanical

  • VolvoPenta 5.7 GXi 320 HP 5.7L V8 EFI
  • Duo Prop Outdrive
  • Stainless Steel Props
  • 12-volt Electrical

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

Talk to usContactOur Team