OFF COURSE Name Reserved | 37' 2018 Winter Custom Yachts

The 2018 37’ Winter Custom Yachts, known as W 26 by the factory, is one of the most beautiful center console vessels in the world. Her proven North Carolina hull form provides a smooth, dry ride and is propelled by triple Mercury Verado 350s. A SeaKeeper 3 keeps this fishing platform steady. Although she’s designed as a tournament winner, she’s also a head-turning cocktail cruiser. A custom tow eye is accompanied by a solar panel and tracking device when she’s pulled behind a yacht. Contact us to schedule a time to see this work of art.

Key Features

•tPedigree sea-keeping design and build quality by Winter Custom Yachts

•tSeaKeeper 3 stabilization

•tTriple Mercury Verado 350s

•tFish-ready

•tTow-ready

•tAlthough lift-kept, new bottom paint and waterline-up polish (March 2024)

•tUpgraded steering pumps

•tAll bilges, engine room and equipment faired and painted with Alexseal Cloud White

•tWalkaround construction

•tLayer 1” Diab A500 foam on cabin

•tLayer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

•tCenterline helm with helm pod

•tGlove box with USB charging outlets

•t(4) Molded in drink holders

•t(2) Simrad NSO 19" touchscreen displays

•tSimrad OP50 controller

•tSimrad Open-Array radar

•tSimrad NAC-2 autopilot

•tRitchie 6" Super sport compass mount

•tNavico 3D Structural scan with forward scan transducer

•tWave Marine WIFI module

•tSimrad VHF

•tNAIS 500 NAIS signal module

•tACR spotlight controller

•tFLIR MD625 fixed thermal imaging camera

•tFusion MS-NRX300 with JL Audio speakers and amps

•t20” Rigid Spot style LED light bar

•tMercury Smartcraft gauges

•tDrink holders in console at helm

•tGlove box with USB charging outlet

•tC Zone display to control systems

•tMolded footrest

•tRelease Marine chairs with flip up bolsters

•tBarro ultra leather fabric

•tMolded in curtain track on console

•tTriple Mercury Verado 350 HP Outboards with up-to-date service

•tMercury gauges and controls

•tMercury power steering recently changed with upgraded pumps

•tMercury fuel filters

•tSide Power SE 80 12 VDC Bow Thruster

•tSeaKeeper 3 gyro stabilizer

•tJabsco saltwater pump

•tJabsco Blaster freshwater pump

•t(4) 1500 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch

•t(2) 2000 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch

•tRule sump boxes

•tFRP discharges on hull sides

•tDometic freshwater flush head with 15 gallon holding tank

•tLivorsi 1150 high speed trim tabs

•tNew batteries

•t525 gallon fuel capacity in cockpit

•t50 gallon fresh water tank

•t15 gallon hot water heater

•t(2) Newmar 60-amp battery charger 12-volt, (3) bank

•tC-Zone control system on all DC systems

•tCustom Paneltronics panels

•t120-volt AC, 24-volt DC

•t30-amp, 240-volt AC service

•t12-volt DC lighting throughout

•tAll wiring guided by ABYC standards

•t(2) 803 TIX Lumishore underwater lights in transom

•tForward bow seating with storage within

•t(6) 15-degree rod holders in bow cap

•t(4) 8” pull up cleats on top deck

•tFaux teak toe rail with chafe gear

•tCustom removable bow pulpit and gear

•tRC-5 low profile windlass

•tMaxSet 8 polished SS plow anchor

•tGenuine teak decking

•tRadiused gunnel faces

•tDive tank storage under love seat

•t(2) Fuel fills on side gunnels

•tWater fill on side gunnels

•tWaste access on gunnels

•tFull pass-through side door with gate

•tPalm Beach Towers hard top

•tCustom molded hardtop with polished aluminum frame T-top style

•tUpgraded hardtop to incorporate thicker 3” hardtop

•tRadar Pod

•tMolded aft single 12-volt LED Lumitec spreader light with molded pod

•tMolded forward single 12-volt LED Lumitec spreader light with molded pod

•tMolded navigation lights

•tRecessed dome lights 12-volt, tri-color

•t(6) Rod holders welded to aft side of hardtop

•tAnchor light on mast

•tMolded in “Pancake” Birdsall Marine teaser reels

•t20” Rigid Spot style LED light bar

•tRupp Revolution Top Gun outrigger bases

•tRupp HD carbon fiber poles 18’

•tRupp HD carbon fiber center rigger

•tOne piece acrylic curtain enclosure

•t(6) 30 degree rod holders in cockpit

•t(2) Hawse pipes on covering board top

•t(2) 10” cleats mounted on side wall I cockpit

•tCustom baitwell in transom

•tBaitwells to feature laminated curved glass

•tGenuine teak decking

•t26” freeboard from transom to bow

•tFull pass-through transom door with gate

•tUnder gunnel accent lighting throughout

•tRelease Marine triple seat with flip-up bolster

•tConcealed access to shore power and water spigots under gunnels

•t(2) In-deck fish box (16” W x 14” D x 60” L)

•tDive ladder on transom

•tAccess to lazarette and gyro compartment

•tFrigid Rigid cooler with slides

•tIntegrated solar panel charging system with monitoring capability

•tWIFI network extender for connection to C-Zone up to 350’

•tCustom SS towing eye

•tTeak stair treads

•tQuarter sawn teak interior

•tTeak and maple flooring

•tCabinetry throughout interior with satin finish

•tWhite painted surfaces

•tSolid teak countertops

•tSolid surface countertops with stainless steel undermount sink

•tJabsco freshwater flush head

•tSatin Southco Mobella McCoy door handles

•tSatin Southco push button latches

•tRecessed Imtra Ventura LED lights with white bezel in overhead

•tAccess to all electronics and AC panel

•tOversized bilge pumps

•tWarning beacon light on top of tower to indicate bilge pump operation

•tA buildup of Alexseal fairing products followed by Alexseal primer to a finished surface

•tTopsides: Alexseal Cloud White

•tHull: Alexseal Stars and Stripes

•tBoot Stripe: Alexseal Cloud White

•tBottom Paint: SeaHawk Cukote Black

•t1” solid stainless steel bumper metal

•t(2) Layers ½” marine grade Okoume plywood

•tLayer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy

•tLayers 1708 Vectorply biaxial fiberglass on keel and chine

•tLayers 1708 Vectorply biaxial fiberglass inside bottom up through hull side

•tLaminated Douglas Fir stringers

•tHull side 2 layers 6mm Okoume plywood Loyds type 1088

•tLayer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

•tLaminated Douglas Fir rib bands

•tLaminated Douglas Fir chine

•tLaminated Douglas Fir sheer clamp

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

Listing MLS by Yachtr.com